Macdon 802 Bi-Directional Adapter User Manual download pdf (Page 42)

41

TROUBLESHOOTING

SYMPTOM

PROBLEM

SOLUTION

REF.

Reel does not operate

smoothly.

Improper hydraulic flow.

Ensure that ¾” hoses to

reel/draper flow valve are

attached to BLUE hydraulic

circuit with 18 GPM flow and

open return to tank on

tractor.

18

6

Side drapers stall.

Improper hydraulic flow.

Ensure that ¾” hoses to

reel/draper flow valve are

attached to BLUE hydraulic

circuit with 18 GPM flow and

open return to tank on

tractor.

18

6

Header improperly

adjusted.

Adjust header as

recommended.

*

Relief pressure too low. Increase relief pressure to

2500 psi.

37

Header or reel does not lift

fast enough.

Raising header and/or

reel while turning tractor.

To reduce lift time, do not lift

header or reel while turning

tractor.

-

Flow to header drives set

too high.

Set flow through BLUE

hydraulic circuit to 18 GPM.

31

Re-direct some flow from

header drive to lift circuits:

• Set reel and draper to

desired speeds.

• Decrease flow in BLUE

circuit until reel and/or

drapers start to slow.

-

Tractor is not supplying

enough oil.

Check tractor hydraulics

*

Reel and/or drapers run too

slow.

Raising header and/or

reel while turning tractor.

To maintain reel and draper

speeds, do not lift header or

reel while turning tractor.

-

Flow to lift circuits set too

high.

Reduce oil flow to TAN

and/or GREEN circuits.

*

Flow to header drives set

too low.

Set flow through BLUE

hydraulic circuit to 18 GPM.

31

Tractor is not supplying

enough oil.

Check tractor hydraulics

*

* - See Tractor or Header Operator’s Manual.

1 2 ... 37 38 39 40 41 42 43 44

Comments to this Manuals

No comments