Macdon 9250 SP User Manual download pdf (Page 34)

Form # 46584 Issue 11/06 Web Rev_01

OPERATION

Start-Up Procedure

DANGER: Avoid possible injury or

death from a runaway machine.

Do not start engine by shorting across starter

terminals. Machine will start in gear and move

if normal starting circuitry is bypassed.

This machine has two safety devices which

prevent the engine from starting unless the

variable speed lever is in neutral, the steering

wheel is locked in the neutral position, and

the header drive switch is in the OFF

position. Under no circumstances are these

circuits to be deliberately rewired so that the

engine can be started with controls out of

neutral.

Start engine only from operator's seat with

controls in neutral. NEVER start engine while

standing on ground. Machine will start in gear

and move if normal starting circuitry is

bypassed.

Before starting engine, be sure there is plenty

of ventilation to avoid asphyxiation.

IMPORTANT: Do not tow machine to start engine.

Damage to hydrostatic drives will result.

ADJUSTING CONTROLS

1. Fasten seat belt.

2. Engage park brake (A).

3. Move header drive switch (B) to off position.

4. Move variable speed lever to neutral position

(C).

5. Turn steering wheel until it locks. Adjust

steering wheel tilt to desired position.

6. Move throttle lever (D) to start-up position -

Lever fully back.

CHECKING INSTRUMENTS

The machine gauges and instruments provide

important information about machine operation

and condition. Familiarize yourself with the gauges

and monitor them carefully during start-up

operation. See "Instruments and Controls".

NEVER SHORT ACROSS STARTER TERMINALS

ENGAGE PARK BRAKE

ADJUST CONTROLS FOR START-UP

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 159 160

Comments to this Manuals

No comments

Macdon 9250 SP User Manual Page 34

Comments to this Manuals

Related products and manuals for Gardening equipment Macdon 9250 SP