MacDon 9352 Operator's Manual download pdf (Page 105)

Form # 46584 Issue 11/06 Web Rev_01

103

MAINTENANCE/SERVICE

Traction Drive: Neutral Set-Up

Procedure (continued)

7. The following adjustment is designed to give the

maximum clearance between the neutral lock

adjustment bolts and the pintle arms without

having the wheels turn. This results in easy

locking of the steering wheel into the neutral

position.

Perform this adjustment for each of the four

neutral lock adjustment bolts, starting at the

rear bolt and working towards the front.

Remember

: Rear pintle arm controls left wheel,

front pintle arm controls right wheel.

• Have a second person grasp the front steering

pivot (F) and continuously rotate it back and

forth while you slowly turn adjustment bolt

counter-clockwise (away from pintle arm). Find

the maximum clearance position without having

the wheel turn.

• Hold bolt with a wrench and tighten jam nut to

secure the position.

• Repeat clearance adjustment until all four bolts

are properly positioned.

8. Shut off engine and remove key.

9. Adjust ground speed lever to center of neutral

detent. See Check #7 on page 100.

10. Repeat steps 5 to 9 if required.

11. Lower drive wheels to ground.

NEUTRAL LOCK ADJUSTMENT BOLTS

CLEARANCE ADJUSTMENT

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 159 160

No comments

MacDon 9352 Operator's Manual Page 105