MacDon 9352 Operator's Manual download pdf (Page 47)

Form # 46584 Issue 11/06 Web Rev_01

OPERATION

Detaching the Header

1. Activate header lift cylinders (switch on ground

speed lever) to raise header fully. For units with

Header Express Down option, use switch on

side console to bypass the feature. Lower the

reel (second switch on lever). Stop engine and

remove key.

DANGER: To avoid bodily injury from

fall of raised header, always engage

header lift cylinder stops (A) when

working on or around raised header.

3. Remove "L" pin (B), both sides and detach float

springs.

4. Remove pin (C) from lower header leg, both

sides.

5. Lower header stand into position (E).

942 Multi-Crop Header

: Place 2 inch (50 mm)

blocks under cutterbar at both ends of header.

6. Disengage header lift cylinder stops.

7. Be sure area is clear of bystanders, then start

engine. Retract lift cylinders to fully lower

header. Stop engine and remove key from

ignition.

ENGAGE LIFT CYLINDER STOPS

DETACH FLOAT SPRINGS

L-PIN DESIGN

CLEVIS PIN DESIGN

REMOVE HEADER PINS

HEADER STAND - DOWN POSITION

963 HEADER STAND

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 159 160

No comments

MacDon 9352 Operator's Manual Page 47