MacDon 9352 Operator's Manual download pdf (Page 142)

Form # 46584 Issue 11/06 Web Rev_01

140

ASSEMBLY

Preparing the Tractor for

962/963 & 972/973 Headers

1. Remove plastic blocks (A) on tractor lift legs

and reinstall as shown with 1/2 x 5 inch bolts

provided.

NOTE: For 12’ 972 Header only, install

extensions (D) with 1/2 x 1 inch hex head bolts

and lock nuts.

2. For 972 Hydraulic Deck Shift Harvest Header,

install deck shift switch (B) (shipped with

header) in side console as follows:

• Cut decal to expose switch hole punch-out.

• Remove punch-out and attach wires from

harness to switch as shown.

NOTE: If header has a serial plate with

production year 2000-1 or older, the switch

provided with the header will be too small for

hole in console panel. Use backing plate if

provided, or order switch 109063.

• When header is attached, check function of

deck shift switch. Pressing left side of rocker

switch should shift decks to the left. If pressing

left side of rocker shifts decks to the right and

vice-versa, exchange positions of the two

outside wires at the switch, or reverse position

of switch in console.

REPOSITION LIFT LINKAGE BLOCKS

INSTALL DECK SHIFT SWITCH

(972 Hydraulic Deck Shift Headers)

DECK SHIFT SWITCH WIRING

LINKAGE BLOCK EXTENSIONS – 12’ 972

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 159 160

No comments

MacDon 9352 Operator's Manual Page 142