MacDon M200 Operator's Manual download pdf (Page 100)

HEADER OPERATION - D SERIES

Form 169017 / 169087 / 169095 98 Revision C

Example:

Windrower is operating at 8 mph with Header

Index “on” and set at 1.5. Display shows;

9.5 1.5 DRAP INDX

where 9.5 (8+1.5) is the draper speed in mph,

and 1.5 is the header index setting.

Windrower speed drops to 7.5 mph at same

Header Index setting. Display shows;

9.0 1.5 DRAP INDX

where 9.0 (7.5+1.5) is the draper speed in mph,

and 1.5 is the header index setting.

Windrower is operating at 8 mph with Header

Index “on” and set at 0.9. Display shows;

8.9 0.9 DRAP INDX

where 8.9 (8+0.9) is the draper speed in mph,

and 0.9 is the header index setting.

6.5.7.2 Draper Speed Independent of Ground

Speed

Set the speed of the draper independently of

ground speed as follows:

NOTE

This procedure can also be used to change

the draper speed “on the go”.

CAUTION

Check to be sure all bystanders have cleared

the area.

##.# = MPH or KPH

HEADER ENGAGED

ON CDM PRESS

FAST OR SLOW

DISPLAY SHOWS

##.# DRAPER SPEED

DONE

SPEED

O.K.?

YES

PRESS DISPLAY SELECTOR

FOR DRAPER SPEED

HEADER INDEX

SWITCH - OFF

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 233 234

No comments

MacDon M200 Operator's Manual Page 100