MacDon M200 Operator's Manual download pdf (Page 123)

MAINTENANCE AND SERVICING

Form 169017 / 169087 / 169095 121 Revision C

7.4 ENGINE COMPARTMENT HOOD

The engine hood has two open positions:

• The lowest is for general maintenance such

as checking and adding fluid, servicing the

cooling box, etc.

• The highest position accommodates full

access to the engine bay.

a. Open the hood at the lowest position as follows:

1. Locate latch (A) behind grill, and lift to release

hood.

2. Raise hood until strap (B), which should be

looped under hooks (C) and (D), stops it at

approximately a 40° angle.

b. To close hood:

1. Pull down on strap (B), grasp the hood when

within reach, and lower until hood engages

latch (A).

c. Open the hood at the highest position as follows:

1. Open hood to lowest position.

2. Remove strap from hooks (C) and (D), and

allow hood to raise fully to approximately 65°.

d. To close hood:

1. Grasp the strap at (B), and loop under upper

hook (C).

2. Pull down on strap, and loop under lower hook

(D).

IMPORTANT

Failure to hook strap may result in it

becoming entangled with the screen

cleaners or the latch.

3. Pull down on strap, grasp the hood when

within reach, and lower until hood engages

latch (A).

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 233 234

No comments

MacDon M200 Operator's Manual Page 123