MacDon M200 Operator's Manual download pdf (Page 82)

HEADER - GENERAL

Form 169017 / 169087 / 169095 80 Revision C

6.4.2.3 Float Options

For draper headers without the deck shift option,

auger headers, and rotary headers, the float can

be pre-programmed for three types of windrowing

conditions. For example:

• Position 1 - Border

• Position 2 - Normal

• Position 3 - Rocky

Set float pre-sets as follows:

a. Engage header.

b. Push float preset switch to position 1.

c. Using HEADER TILT SWITCHES, set center-link

to mid-range position (05.0 on DISPLAY).

d. Using HEADER DOWN switch, lower header fully

with lift cylinders fully retracted.

e. Using left float switch, push

+ to increase float, or

– to decrease float on left side of header.

DISPLAY will indicate selected float for left side,

for example (8.0 L FLOAT R XX.X).

f. Repeat for right side float with right switch.

DISPLAY will indicate float for both sides, for

example (8.0 L FLOAT R 3.0).

g. Select a second preset with the float preset

switch.

h. Repeat steps e. and f. to set the float.

i. Select a third preset with the float preset switch.

j. Repeat steps e. and f. to set the float.

k. Operate windrower.

DISPLAY

INCREASE

FLOAT RIGHT

DECREASE

FLOAT RIGHT

INCREASE

FLOAT LEFT

DECREASE

FLOAT LEFT

HEADER DOWN

DISPLAY

HEADER TILT UP

HEADER

TILT DOWN

FLOAT

PRESET 2

FLOAT

PRESET 3

FLOAT

PRESET 1

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 233 234

Comments to this Manuals

No comments

MacDon M200 Operator's Manual Page 82

Comments to this Manuals

Related products and manuals for Tractor MacDon M200