MacDon M200 Operator's Manual download pdf (Page 147)

MAINTENANCE AND SERVICING - M150 ENGINE

Form 169017 / 169087 / 169095 145 Revision C

g. Remove plug (L), to ensure tank is completely

drained after fuel has stopped flowing from hose.

h. Add some clean fuel to tank to flush out any

remaining contaminants.

i. Replace drain plug, and reattach hose (J) to fitting.

Install clamp (K), and tighten.

j. Refill tank.

7.8.6.4 Separator

A fuel water separator is incorporated into the

primary fuel filter.

The separator is equipped with a sensor (G) that

detects water in the fuel, and alerts the operator

on the CDM.

Drain the water and sediment as follows from the

separator daily, or at any time the CDM Water in

Fuel (WIF) light illuminates.

a. Stop engine, and remove key.

b. Place a container under the filter to catch spilled

fluid.

c. Turn drain valve (M) by hand 1½ to 2 turns

counter clockwise until draining occurs.

d. Drain the filter sump of water and sediment until

clear fuel is visible.

e. Turn the valve clockwise to close the drain.

f. Dispose of fluid safely.

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 233 234

No comments

MacDon M200 Operator's Manual Page 147