MacDon M200 Operator's Manual download pdf (Page 171)

MAINTENANCE AND SERVICING - M200 ENGINE

Form 169017 / 169087 / 169095 169 Revision C

m. Stop engine, and drain water out before rust or

sediment settles. See steps d. to i.

n. Close radiator drain valve (B), and replace block

drain plug (D).

o. Fill system with a solution of clean water and a

heavy duty radiator cleaner. Follow instructions

provided with cleaner.

p. After using cleaner solution, again flush system

with clean water. See steps k. to m. Inspect

radiator, hoses and fittings for leaks.

q. Close radiator drain valve (B), and replace block

drain plug (D).

r. Fill system through radiator filler pipe (A) Use

Ethylene Glycol with SCA equal parts with high

quality, soft, de-ionized or distilled water as

recommended by the supplier. System capacity is

5.3 U.S. Gallons (20 litres).

s. Close radiator cap tightly.

t. Remove cap (E) from recovery tank (F), and add

coolant until half full.

u. Move maintenance platform to working position,

and close engine compartment hood.

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 233 234

No comments

MacDon M200 Operator's Manual Page 171