MacDon M200 Operator's Manual download pdf (Page 39)

OPERATOR’S STATION

Form 169017 / 169087 / 169095 37 Revision C

CAB - FORWARD / ENGINE RUNNING / HEADER ENGAGED

DRAPER HEADER / INDEX SWITCH OFF

(Scroll Through Display with CDM Switch or GSL Switch)

DISPLAY (Lower or Upper Line) DESCRIPTION

#####.# ENGINE HRS

Total Engine Operating Time.

#####.# HEADER HRS

Total Header Operating Time.

##.# ACRES/HOUR

##.# HECTARES/HOUR (If Metric)

Actual Cutting Rate In Acres (Hectares)/Hour.

###.# SUB ACRES

###.# SUB HECTARES (If Metric)

Area Cut Since Last Reset.

To Reset, Display SUB ACRES On Lower Line And Hold

Down Program Switch Until Display Resets

(5 - 7 Seconds).

###### TOTAL ACRES

###### TOTAL HECT (If Metric)

Total Area Cut By Machine.

##.## REEL MPH

##.## REEL KPH (If Metric)

##.## REEL SENSOR (Sensor Disabled)

Reel Peripheral Speed.

##.# DRAPER SPEED

Draper Speed (0.0 - 11.0).

#### KNIFE SPEED

#### KNIFE SENSOR (Sensor Disabled)

Knife Speed In Strokes Per Minute.

##.# HEADER HEIGHT

##.# HEIGHT SENSOR (Sensor Disabled)

Distance Setting (00.0 - 10.0) Between Cutterbar and

Ground.

##.# HEADER ANGLE

##.# TILT SENSOR (Sensor Disabled)

Angle Setting (00.0 - 10.0). Header Relative To Ground.

##.# L FLOAT R ##.#

Left And Right Float Setting (0.0 - 10.0).

LOAD|■■■■■_____| ####

(If Metric) #####

Bar Graph Representing Hydraulic Operating Pressure.

Full Scale Is Pre-Programmed Overload Pressure

(M150: 2500 -4000 PSI; M200: 2500 - 4800 PSI).

If Sensor Disabled, LOAD Does Not Display. See Note.

##.# VOLTS

Engine Electrical System Operating Voltage.

SCROLL

SUB-MENU (Lower Line Only)

#### KNIFE SPEED

##.# HEADER HEIGHT

LOAD|■■■■■■■■■■■■| ####

##.## REEL MPH

##.# DRAPER SPEED

Displays Sub-Menu After 2 - 3 Seconds.

Press SELECT to cancel.

Scroll Through Sub-Menu Display with CDM Switch

NOTE: The load sensor is factory installed on M200 (optional for M150) to monitor knife/conditioner circuit pressure.

To monitor reel circuit pressure, relocate sensor as per Instructional Manual #169031 which is available through your MacDon

Dealer.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 233 234

Comments to this Manuals

No comments

MacDon M200 Operator's Manual Page 39

Comments to this Manuals

Related products and manuals for Tractor MacDon M200