MacDon M200 Operator's Manual download pdf (Page 124)

MAINTENANCE AND SERVICING

Form 169017 / 169087 / 169095 122 Revision C

7.5 MAINTENANCE PLATFORMS

Swing away platform/stair units are provided on

both sides of the windrower for access to the

Operator’s station and engine bay maintenance.

7.5.1 OPENING/CLOSING PLATFORMS

a. Push latch (A) down, and pull platform (B) toward

walking beam, until it stops and latch re-engages

in open position.

b. To move platform back to closed position, release

latch (A), and move platform forward until it stops

and latch re-engages.

7.5.2 OPENING/CLOSING PLATFORM FOR

MAJOR SERVICING

To improve access to the hydraulics plumbing and

battery, the platforms can be swung away from the

windrower.

Right side cab-forward platform is shown.

a. Open platform as follows:

1. Open engine compartment hood to lowest

position.

IMPORTANT

Failure to open hood will result in damage

to the hood when the platform is

repositioned.

2. Remove nut and bolt (C), and swing link (D)

clear of battery and/or valve block.

3. Unlock latch (A), and move platform (B)

toward open position.

(continued next page)

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 233 234

No comments

MacDon M200 Operator's Manual Page 124