MacDon M200 Operator's Manual download pdf (Page 223)

OPTIONS / ATTACHMENTS

Form 169017 / 169087 / 169095 221 Revision C

9 OPTIONS / ATTACHMENTS

9.1 REEL DRIVE AND LIFT PLUMBING

Reel drive and lift plumbing for draper headers on

windrowers that are shipped from the factory in

auger header configuration. Installation

instructions are included.

9.2 WINDROWER HYDRAULIC

COMPLETION FOR DRAPER

HEADER REEL FORE-AFT

Allows reel fore-aft hydraulic adjustment for draper

headers on windrowers that are shipped from the

factory in auger header configuration. Kit includes

valve for selection of reel fore-aft or double

windrow attachment functions. Installation

instructions are included.

9.3 DOUBLE WINDROW ATTACHMENT

Allows auger header windrower to lay a double

windrow. Installation instructions are included.

9.4 REVERSER VALVE AND

PLUMBING

Allows the header drive direction to be reversed

on both draper and auger headers to assist in

unplugging the header. With this option, all

components on the auger header can operate in

the opposite direction. On the draper header, only

the drapers, conditioner and knife are reversible.

Installation instructions are included.

9.5 BOOSTER SPRING KIT

Available for headers over 6000 lb (2724 kg).

Installation instructions are included.

9.6 INTERNAL BOOSTER SPRING KIT

Internal spring for right side lift linkage to improve

float capacity. Standard equipment on left side.

9.7 LIGHT HEADER FLOTATION KIT

Available for headers that do not require as much

spring tension for float. Installation instructions

are included.

9.8 WINDSHIELD SHADES

Retractable sun shades for front and rear

windows. Installation instructions are included.

9.9 DISC HEADER VALVE

Required for attaching a R80 Disc Header to

M150. Installation instructions are included.

9.10 AM/FM RADIO

Available for installation into pre-wired cab.

Speakers are factory installed.

Refer to M150 and M200 Self-Propelled

Windrower Unloading and Assembly Instructions

for installation instructions. This instructional

manual is supplied with your windrower.

9.11 CENTER-LINK SELF-ALIGNMENT

KIT

Available for M150 and M200 Windrowers

equipped with hydraulic center-link. Allows the

center-link cylinder to be hydraulically positioned

and connected to the header without leaving the

Operator’s station. Installation instructions are

included.

9.12 PRESSURE SENSOR KIT

Monitors hydraulic pressure and warns of overload

conditions. Installation instructions are included.

9.13 HYDRAULIC CENTER-LINK

The hydraulic center-link allows the operator to

adjust the header angle from the cab. It is

standard on the M200, and optional on the M150.

9.14 WEIGHT BOX

The weight box allows engine-forward transport in

high range when the header is not attached.

9.15 TOWING HARNESS

The towing harness is used together with the

weight box if towing a D Series draper header

behind the windrower is desired.

9.16 SWATH ROLLER

If a swath roller is desired for canola or other

similar crops, an axle mounted design is

recommended. Windrower can be fitted with

hydraulic lift version of swath rollers featuring in-

console controls.

(continued next page)

1 2 ... 218 219 220 221 222 223 224 225 226 227 228 ... 233 234

Comments to this Manuals

No comments

MacDon M200 Operator's Manual Page 223

Comments to this Manuals

Related products and manuals for Tractor MacDon M200