MacDon 9352 Operator's Manual download pdf (Page 67)

Form # 46584 Issue 11/06 Web Rev_01

MAINTENANCE/SERVICE

Diesel Engine

LUBRICATING OIL

Check engine oil level daily on dipstick

See "Fuels, Fluids and Lubricants" section for

recommended oil type.

IMPORTANT: Never operate the engine with the

oil level below the "L" (LOW) mark or above the

"H" (HIGH) mark.

CAPACITY - LOW MARK TO HIGH: 1 U.S. qt. (1

litre)

Change engine oil and filter after the FIRST 25

HOURS OF OPERATION and every (200 hours –

2004 & older units), (500 hours – 2005 units), (or

beginning of each operating season) thereafter.

To change:

1. Warm up the engine. Shut engine off and

remove ignition key.

2. Remove the drain plug (A) and allow oil to

drain.

CAUTION: Remember that the oil is

hot.

NOTE: A drain pan with a capacity of 5 U.S.

gallons (20 litres) will be adequate.

3. Check the condition of the used oil:

- Thin, black oil indicates fuel dilution.

- Milky discoloration indicates coolant

dilution.

If oil appears diluted, have your Dealer correct

the problem before operating the windrower.

4. Clean around the filter head, remove the filter

(F) and clean the gasket surface.

5. Apply a thin film of clean oil to the gasket on the

new filter.

MAINTAIN ENGINE OIL LEVEL

REMOVE DRAIN PLUG

OIL FILTER

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 159 160

No comments

MacDon 9352 Operator's Manual Page 67